Metal Path Garden Gate 043

Metal Gates Long Desc.

Welcome to our metal path gates products.  We have put a lot of time into creating an easy to use, fully customizable website to allow you to create the perfect gate for your property. We have created several infographic guides and instructions to help you create your gate.

Guides (click to view)

How To Measure

Metal Finishes - Galvanizing: Galvanizing & It's Benefits

Metal Finishes - Powder Coating: Powder Coating Guide

Installation

Custom Gate Colours (Gold Railheads, Detailing Etc) - NEEDS PHOTO (thornhill)

All of the components (metal decorations) on our gates (railheads, circles, baskets, bushes etc) can be hand finished with gold metal paint (or any colour).

We do offer this service, however, we recommend that the customer details the gates once installed/received. This job is not difficult but it is very time consuming and it can unnecessarily increase the final cost of your gate!

Example costs:

** PHOTO OF Thornhill **

To paint all the railheads as shown in the photo (2 coats gold) - £150.

Please get in touch for prices

Specification details

Premium Frame -  40mm x 40mm box section

Infill Bars -  16mm

Top Rail (flat or arched depending on design) -

Decor -

Posts (If Selected) - 50mm x 50mm mild steel

How To Measure All Gates Guide

We have included many diagrams to assist you when measuring for your new gates.  If you are unsure, please send us a picture of your opening and we can advise on where to measure!

Please let us know if you intend on installing between your gap opening or behind your gap opening. 

Note - Although the gap width is calculated in the exact same way, the mounting position guide shown below illustrates our metal framed range setups - with rear mounted hinges. Our standard and premium metal only ranges are hinged through the gate frames. See additional diagram below.

Metal Framed Range Gap Width & Hinge Diagram

When measuring, please ensure to take 3 measurements at the top, middle and bottom of your gap opening. 

Take the SMALLEST of these sizes, and provide us with this size. 

Standard & Premium Metal Only Range Gap Width & Hinge Diagram

We custom manufacture all metal posts at the same time as your new gates. We can provide 0, 1 or 2 new posts depending on requirements. Should you have suitable existing walls/posts then we will supply the free hinge brackets for installation. 

We pride ourselves on how customizable and bespoke all of our products are. By giving us all of the required information your gate will be designed & work perfectly, unlike other cheaper 'universal' gates available to purchase.

See our handy 'Hinge Location Guide' below to help you decide which way you would like the gate to open.

IMPORTANT NOTE - We need to know if you would like your gate to OPEN IN (STANDARD DESIGN) (push the gate and it swings into your garden/property) or if you need the gate to OPEN OUT (pull the gate towards you,  usually required if there is an obstruction such as a doorstep etc).

REMEMBER - All of our designs are based on you standing OUTSIDE the property (on the Street for example, looking into the property). See below drawings for guidance:

(click image on mobile/tablets to go full screen/zoom in)

We custom manufacture all metal posts at the same time as your new gates. We can provide 0, 1 or 2 new posts depending on requirements. Should you have suitable existing walls/posts then we will supply the free hinge brackets for installation.