Page Aluminium Sliding Gate (Tall)

Our aluminium sliding gate systems are the perfect finish to your driveway. Complete with our maintenance free aluminium infills. We offer this gate in both cantilever and tracked systems, bespoke made to your sizes.

From: £2,349.00

Quantity:

Product Description

Maintenance free, aluminium sliding gate systems. All of our sliding gates are manufactured with an overhang, which has several purposes. The first is that it allows the support roller system (typically hidden behind the opening) to connect to the gate. It also is more aesthetically pleasing as you cannot see through the sides. When measuring for your new aluminium sliding gate, simply take the opening size as you normally would for a driveway gate (measure the clear opening). Included in our pricing, we have allowed for this 500mm overhang which is manfactured as part of the sliding gate. You only need to select the size bracket for your gap width, opening size. For example, if your gap/opening is 3.6m - we will manufacture the gate to be 4.1m. You would select the price/size bracket that has 3.6m within it. If you need help planning your sliding gate system, whether its tracked or cantilever, contact our technical support team today!  

Proudly 100% manufactured here in the UK.

Remember that any of our aluminium  gate range designs can be manufactured ready for gate automation - please contact us for more information. We can supply Roger Technology automation kits, with bracketry pre fabricated to the gate.    

How to measure and install a sliding gate system

NOTE - we are currently updating our extensive guides on measuring and installing sliding gates, including how to videos. Basic information has been provided below during this time. Please contact our technical team for more assistance at present.

 

Measuring For A Sliding Gate

Measure your opening width or gap width.

Ensure you have enough run back (for when the gate is open). Typically you require at least 500mm more than the opening size for a tracked gate. For a cantilever, it is typically 40% more than the opening size.

 

Installing A Sliding Gate

With the correct preparation a sliding gate install can be relatively easy.

Levels are important - take the levels across the driveway (does it rise or fall left/right?). Also, the levels into the run back area (where the sliding gate opens).

 

We offer our sliding gate systems in both cantilever and tracked versions.

The kits come with all hardware to allow a complete installation of a manual sliding gate. If you wish to automate this, we can also supply sliding gate motors by Roger Technology Italy - the best on the market!  We install these ourselves and can highly recommend them for reliability.

These sliding kits are used on all of our different gate ranges - composite sliding gates, aluminium sliding gates and metal sliding gates.

 

Cantilever Sliding Gate Kit:

Cantilever gate track (attached to bottom of gate)

Cantilever carriage wheels x 2 (the gate runs on these wheels, which are attached to concrete base)

Cantilever carriage end inserts x 2 (to finish the ends of gate carriage)

Cantilever meeting point/resting cups x 2 (to locate and

Support post system + base plate for installation

Closing post & locating 'Y' mouth (receives the gate in the fully closed position)

Stop safety post (receives the gate in the fully open position, also prevents and accidental run offs)

Sliding gate guide / support roller system

Optional - Sliding gate brushless motor kit

 

Tracked Sliding Gate Kit:

Sliding gate ground track (concrete in OR bolt down) (The gate runs on this track similar to a train track)

Tracked sliding gate wheels x 2 (These are installed directly onto the bottom of the gate, which then sits on the track)

Support post system + base plate for installation

Closing post & locating 'Y' mouth (receives the gate in the fully closed position)

Stop safety post (receives the gate in the fully open position, also prevents and accidental run offs)

Sliding gate guide / support roller system

Optional - Sliding gate brushless motor kit

Our current lead time from order confirmation to delivery is 6 to 8 weeks. More delivery information can be found on the delivery page, from the home page menu.
We have a wide range of sliding gate hardware available, for example post boxes can be custom designed into the sliding gate system. Please contact us for more information at this time while we are updating the website.
We offer a range of electric gate motors and associated hardware, such as toothed rack, to suit your new automated sliding gate system. Products will display here shortly. Please contact us for more information at present.